停售
停售
本商品為研發實驗用的模組,必須在二次加工後,才具備訊號傳輸功能。
並非直接插電後可直接使用之射頻模組,非屬電信管制射頻器材。
商品簡介 |
有什麼關於V2.1.0
新Wemos D1 R2 V2.1.0的WiFi一家立足ESP8266對於Arduino®的相容Nodemcu
產品特點:The D1 R2 is a WiFi capable ESP8266EX based development board in the form of the Arduino® UNO board format.
This board is compatible with the Arduino® IDE and with NodeMCU. Tutorials for each can be found in the resources section below.
The D1 R2 also features an on-board switching power supply which allows you to power the board from a power supply up to 12V.
We offer a board similar to this called the Wemos D1 Mini that is much smaller in size and breadboard-compatible.
Note: The D1 R2 is a 3.3V device. If you connect it to 5V digital sensors or devices you may need a logic-level converter such as our 4-channel or 8-channel logic-level converter modules.
PRODUCT CONTENTS:
商品規格 |
SPECIFICATIONS:
PINS:
Board Pin | Function | ESP8266 Pin |
---|---|---|
TX | TXD | TXD |
RX | RXD | RXD |
A0 | Analog input | A0 |
D0 | I/O | GPIO16 |
D1 | I/O, SCL | GPIO5 |
D2 | I/O, SDA | GPIO4 |
D3 | I/O, 10k pull-up | GPIO0 |
D4 | I/O, 10k pull-up, BUILTIN_LED | GPIO2 |
D5 | I/O, SCK | GPIO14 |
D6 | I/O, MISO | GPIO12 |
D7 | I/O, MOSI | GPIO13 |
D8 | I/O, 10k pull-down, SS | GPIO15 |
GND | Ground | GND |
5V | 5V | |
3V3 | 3.3V | 3.3V |
RST | Reset | RST |
All of the I/O pins have interrupt/PWM/I2C/one-wire capability, except for D0
此商品可兼容Arduino®
下載文件 |
出貨清單 |